7*24 Saat Destek ve Tam Sürücü Sistemi Çözümleri

 

With the development of automation technology, AGV (Automated Guided Vehicle) is a key logistics automation equipment and is widely used in factories, warehouses, logistics centers and other scenarios. As one of the core driving components of AGV, servo motor directly affects the motion accuracy, response speed and work efficiency of AGV. This article will discuss the importance of servo motors in AGV, the comparison with other motors, application scenarios, and how to choose the most suitable servo motor according to needs.

1. The significance of servo motor for AGV

In the AGV system, the servo motor plays a particularly important role. It is not only responsible for driving the AGV forward, turning, accelerating and decelerating, but also supports the high-precision motion control of the AGV in complex paths and environments. The servo motor adjusts the output in real time through a closed-loop control system to ensure that the AGV can operate stably in a dynamic environment.

Latent AGV Jacking Hub Reducer Motor Driver
  • High-precision motion control: The servo motor can ensure that the AGV maintains a stable speed and position during driving through a precise feedback mechanism. For warehouse environments that require high-precision operations, the control accuracy of the servo motor greatly improves efficiency and safety.
  • Improve the overall efficiency and endurance of AGV: The high energy efficiency of the servo motor can reduce the energy consumption of the battery, allowing the AGV to maintain a longer endurance during long-term operation and reduce the frequency of charging.
High-Quality 400W DC Motor from China Factory
  • Support AGV intelligence and automation: Servo motors can be seamlessly integrated with other sensors and control systems to support the automated execution of complex tasks such as path planning, obstacle avoidance, and load distribution.
  • Improve stability and response speed: The fast dynamic response of the servo motor makes the AGV perform more smoothly when frequent starts, stops and turns are required, ensuring smooth operation in high-frequency operations.
  1. Comparison of motor types, highlighting the advantages of servo motors

In AGV applications, common motor types include stepper motors, DC motors, brushless motors, and servo motors, which differ in performance, cost, and applicable scenarios.

  • Stepper motor: It has high positioning accuracy, but it is easy to lose steps when the load increases, and its dynamic performance is poor. It is suitable for small AGVs with low speed requirements.
  • DC motor: simple to control, low cost, but requires frequent maintenance (such as replacing brushes), not suitable for long-term high-load operation.
  • Brushless motor: high efficiency, long life, relatively stable torque output, suitable for AGVs with higher speed requirements, but complex control and high cost.
  • Servo motor: It combines the advantages of the above motors, has higher dynamic response speed, precise torque control and a larger speed range, and is particularly suitable for AGV scenarios that require high precision, high load and high frequency operation. Its feedback control system ensures stable performance and reduces energy consumption.

Motor Type

advantage

shortcoming

Servo motor advantages

Stepper Motor

Simple control, precise positioning, low cost

The torque drops rapidly, the speed range is small, and the heat is obvious

Servo motors are superior to stepper motors in terms of high torque and high response

DC Motor

Simple control, good low speed performance, convenient speed regulation

Requires regular maintenance, low efficiency, large size

Servo motors require no brush maintenance, are more efficient and have lower noise

Brushless Motor

High efficiency, low maintenance, smooth torque output

Complex control and high cost

Servo motors have higher dynamic responsiveness and higher control accuracy

Servo Motor

High precision, high dynamic response, wide speed range, energy saving

Complex control and high initial cost

Servo motors offer the advantages of multifunctional integration and intelligence

Servo motors have obvious advantages in load adaptability, precision, torque output and response speed, especially in complex and demanding task scenarios, and can ensure the efficient operation of AGVs.

 

2. servo motors used in AGV?

In AGV, servo motors are usually used in multiple key parts, each of which has different task requirements and power requirements.

  1. Drive wheel: The servo motor drive wheel is the main power source of the AGV, responsible for the AGV's forward, backward, turning and other actions. The drive wheel requires the servo motor to provide stable torque output and speed control to ensure that the AGV can run smoothly under different load conditions. In scenarios where the ground is uneven and the load fluctuates greatly, the servo motor can respond quickly and adjust the output to avoid slipping or loss of control.
    • Speed requirements: The speed requirements of AGVs are different, and the required servo motor rated speeds are also different. High-speed AGVs require servo motors that can maintain high dynamic response at high frequency of start and stop.
  1. Steering system: The steering system usually requires the servo motor to accurately control the angle and position to ensure that the AGV can flexibly adjust the direction in complex paths. Especially for AGVs with omnidirectional wheels, the servo motor plays a key role in multi-axis synchronous control.High-Performance Traction AGV, Precision Steering, High Load Capacity (1)
  2. Lifting system: Some AGVs also have a lifting function for lifting goods or adjusting height. The servo motor provides powerful vertical power and height control in this system to ensure stability during cargo handling.
    • Load capacity: The power and torque of the servo motor should be selected according to the maximum load that the AGV needs to carry. For example, for an AGV that needs to lift heavy objects frequently, a servo motor with a higher torque output should be selected to ensure the stability of the lifting operation.
  3. Grasping and loading system: For AGVs equipped with robotic arms or gripping devices, servo motors are used to drive multiple joints to achieve precise grasping and loading, which is suitable for complex tasks such as picking and handling.
    • Intelligent integration: As AGV becomes more intelligent, the selection of servo motors should also consider their compatibility with the control system to ensure that the motors can work together with sensors and controllers to achieve intelligent path planning and automated operation.
  4. Servo motors need to adapt to different working environments. In a warehouse environment, AGVs usually need to start, stop and turn frequently, and servo motors need to respond quickly and consume less energy. In outdoor or extreme environments, the servo motor's ability to resist shock and dust is particularly important.
    • Working environment: For AGVs operating in high temperature, low temperature or humid environments, the servo motor should have high environmental tolerance to ensure stable operation under extreme conditions.
    • Energy efficiency optimization: Selecting a servo motor with higher energy efficiency can help reduce the energy consumption of the AGV and extend the battery life. This is critical for AGVs that run for a long time, especially battery-powered systems.

 

3. Conclusion

As the core component of AGV, servo motor plays a vital role in motion control, load handling, energy consumption management, etc. By selecting the right servo motor and optimizing its performance in different application scenarios, AGV can operate efficiently in various complex tasks and continue to play an important role in the future intelligent process.

AGV Drive Wheel with Gearbox for Warehousing Logistics from China Factory 

Thank you for your attention to HKT-Robot! Our servo motors are known for their high performance and efficiency. They are suitable for a variety of AGV application scenarios and help enterprises achieve intelligent upgrades. Click the inquiry button below to contact us, our team will contact you as soon as possible to provide the best support and solutions for your project